PSA file: C:\Documents and Settings\Administrator\Application Data\Sea-Bird\Seasave\Seasave.psa Date: 03/22/2011 Instrument configuration file: C:\PolarSea\CTDData\001001\001001.CON Configuration report for SBE 911plus/917plus CTD ------------------------------------------------ Frequency channels suppressed : 0 Voltage words suppressed : 0 Computer interface : RS-232C Scans to average : 1 NMEA position data added : Yes NMEA depth data added : No NMEA time added : No NMEA device connected to : deck unit Surface PAR voltage added : Yes Scan time added : No 1) Frequency 0, Temperature Serial number : 2498 Calibrated on : 12-Jan-10 G : 4.36331913e-003 H : 6.43662200e-004 I : 2.32535878e-005 J : 2.16566183e-006 F0 : 1000.000 Slope : 1.00000000 Offset : 0.0000 2) Frequency 1, Conductivity Serial number : 2361 Calibrated on : 13-Jan-2010 G : -1.20127883e+001 H : 1.48741432e+000 I : 3.02523170e-004 J : 6.75964415e-005 CTcor : 3.2500e-006 CPcor : -9.57000000e-008 Slope : 1.00000000 Offset : 0.00000 3) Frequency 2, Pressure, Digiquartz with TC Serial number : 0416 Calibrated on : 26-Jan-10 C1 : -4.969234e+004 C2 : 1.442617e-001 C3 : 1.188000e-002 D1 : 3.871600e-002 D2 : 0.000000e+000 T1 : 3.019443e+001 T2 : -4.181683e-004 T3 : 4.168890e-006 T4 : 2.727060e-009 T5 : 0.000000e+000 Slope : 0.99996881 Offset : 1.19698 AD590M : 1.129000e-002 AD590B : -8.231260e+000 4) Frequency 3, Temperature, 2 Serial number : 4353 Calibrated on : 27-Jan-10 G : 4.33683842e-003 H : 6.34135871e-004 I : 2.05765752e-005 J : 1.74378554e-006 F0 : 1000.000 Slope : 1.00000000 Offset : 0.0000 5) Frequency 4, Conductivity, 2 Serial number : 2863 Calibrated on : 13-Jan-2010 G : -1.05712851e+001 H : 1.46300368e+000 I : 7.06428737e-004 J : 2.15792945e-005 CTcor : 3.2500e-006 CPcor : -9.57000000e-008 Slope : 1.00000000 Offset : 0.00000 6) A/D voltage 0, Fluorometer, Chelsea Aqua 3 Serial number : 088234 Calibrated on : 12-Feb-2010 VB : 0.487560 V1 : 2.128900 Vacetone : 0.508400 Scale factor : 1.000000 Slope : 1.000000 Offset : 0.000000 7) A/D voltage 1, Free 8) A/D voltage 2, Oxygen, SBE 43 Serial number : 0501 Calibrated on : 09-Jan-10p Equation : Sea-Bird Soc : 3.79700e-001 Offset : -4.74500e-001 A : -1.50960e-003 B : 1.80760e-004 C : -3.71270e-006 E : 3.60000e-002 Tau20 : 1.21000e+000 D1 : 1.92630e-004 D2 : -4.64800e-002 H1 : -3.30000e-002 H2 : 5.00000e+003 H3 : 1.45000e+003 9) A/D voltage 3, Free 10) A/D voltage 4, Altimeter Serial number : PSA-916 No. 1062 Calibrated on : 01-Jan-2010 Scale factor : 15.000 Offset : 0.000 11) A/D voltage 5, Free 12) A/D voltage 6, Transmissometer, Chelsea/Seatech/WET Lab CStar Serial number : CST-436DR Calibrated on : 02-Mar-2010 M : 22.0460 B : 0.9760 Path length : 0.250 13) A/D voltage 7, PAR/Irradiance, Biospherical/Licor Serial number : QSR-2300 No. 70112 Calibrated on : 12-Jan-2009 M : 0.00000000 B : 0.00000000 Calibration constant : 0.00000000 Multiplier : 1.00000000 Offset : 0.00000000 14) SPAR voltage, Unavailable 15) SPAR voltage, SPAR/Surface Irradiance Serial number : QSR-2300 Calibrated on : 12-Jan-2009 Conversion factor : 1656.00000000 Ratio multiplier : 100.00000000 Scan length : 40 --------------------------------------------- Pump Control This setting is only applicable to a custom build of the SBE 9plus. Enable pump on / pump off commands: NO --------------------------------------------- Data Acquisition: Archive data: YES Delay archiving: NO Data archive: Timeout (seconds) at startup: 20 Timeout (seconds) between scans: 20 --------------------------------------------- Instrument port configuration: Port = COM1 Baud rate = 9600 Parity = N Data bits = 8 Stop bits = 1 --------------------------------------------- Water Sampler Data: Water Sampler Type: None --------------------------------------------- Header information: Header Choice = Prompt for Header Information --------------------------------------------- TCP/IP - port numbers: Data acquisition: Data port: 49163 Status port: 49165 Command port: 49164 Remote bottle firing: Command port: 49167 Status port: 49168 Remote data publishing: Converted data port: 49161 Raw data port: 49160 --------------------------------------------- Miscellaneous data for calculations Depth and Average Sound Velocity Latitude when NMEA is not available: 0.00000000 Average Sound Velocity Minimum pressure [db]: 20.00000000 Minimum salinity [psu]: 20.00000000 Pressure window size [db]: 20.00000000 Time window size [s]: 60.00000000 Descent and Acceleration Window size [s]: 2.00000000 Plume Anomaly Theta-B: 0.00000000 Salinity-B 0.00000000 Theta-Z / Salinity-Z 0.00000000 Reference pressure [db] 0.00000000 Oxygen Window size [s]: 2.00000000 Apply hysteresis correction: 1 Apply Tau correction: 1 Potential Temperature Anomaly A0: 0.00000000 A1: 0.00000000 A1 Multiplier: Salinity --------------------------------------------- Serial Data Output: Output data to serial port: NO --------------------------------------------- Mark Variables: Variables: Digits Variable Name [units] ------ --------------------- 0 Scan Count 4 Depth [salt water, m] 7 Conductivity [S/m] 5 Salinity, Practical [PSU] --------------------------------------------- Shared File Output: Output data to shared file: NO --------------------------------------------- TCP/IP Output: Raw data: Output raw data to socket: NO XML wrapper and settings: NO Seconds between raw data updates: 0.00000000 Converted data: Output converted data to socket: NO XML format: NO --------------------------------------------- SBE 11plus Deck Unit Alarms Enable minimum pressure alarm: NO Enable maximum pressure alarm: NO Enable altimeter alarm: NO --------------------------------------------- SBE 14 Remote Display Enable SBE 14 Remote Display: NO --------------------------------------------- PC Alarms Enable minimum pressure alarm: NO Enable maximum pressure alarm: NO Enable altimeter alarm: NO Enable bottom contact alarm: NO Alarm uses PC sound card. --------------------------------------------- Options: Prompt to save program setup changes: YES Automatically save program setup changes on exit: NO Confirm instrument configuration change: YES Confirm display setup changes: YES Confirm output file overwrite: YES Check scan length: YES Compare serial numbers: YES Maximized plot may cover Seasave: NO