DYCOMS-II Upper Air: Vandenberg AFB High Resolution (300 m) Radiosonde Data 1.0 General Information The Vandenberg Air Force Base High Resolution Radiosonde Data is one of several upper air data sets collected by the University Corporation for Atmospheric Research/Joint Office for Science Support (UCAR/JOSS) as part of the Dynamics and Chemistry of Marine Stratocumulus Phase II: Entrainment Studies (DYCOMS-II) project. Included in the data set are pressure, temperature, relative humidity, U and V wind components, and altitude taken during radiosonde flights from the United States Air Force Base at Vandenberg, California. The data set covers the period from 7 - 31 July 2001. The soundings are typically available twice per day at 00 and 12 UTC. UCAR/JOSS has performed automated quality control on these data. Consult the README for more information. 2.0 Data Contact Scot Loehrer (loehrer@ucar.edu) 3.0 Data and Format Information 3.1 Detailed Format Description All upper air soundings were converted to University Corporation for Atmospheric Research/Joint Office for Science Support (UCAR/JOSS) Cross Chain LORAN Atmospheric Sounding System (CLASS) Format (JCF). JCF is a version of the National Center for Atmospheric Research (NCAR) CLASS format and is an ASCII format consisting of 15 header records for each sounding followed by the data records with associated QC information. 3.1.1 Header Records The header records (15 total records) contain data type, project ID, site ID, site location, release time, sonde type, meteorological and wind data processors, and the operator's name and comments. The first five header lines contain information identifying the sounding, and have a rigidly defined form. The following 7 header lines are used for auxiliary information and comments about the sounding, and may vary from dataset to dataset. The last 3 header records contain header information for the data columns. Line 13 holds the field names, line 14 the field units, and line 15 contains dashes ('-' characters) delineating the extent of the field. The five standard header lines are as follows: Line Label (padded to 35 char) Contents 1 Data Type: Description of type and resolution of data. 2 Project ID: ID of weather project. 3 Release Site Type/Site ID: Description of release site. 4 Release Location (lon,lat,alt): Position of release site, in format described below. 5 UTC Launch Time (y,m,d,h,m,s): Time of release, in format: yyyy, mm, dd, hh:mm:ss The release location is given as: lon (deg min), lat (deg min), lon (dec. deg), lat (dec. deg), alt (m) Longitude in deg min is in the format: ddd mm.mm'W where ddd is the number of degrees from True North (with leading zeros if necessary), mm.mm is the decimal number of minutes, and W represents W or E for west or east longitude, respectively. Latitude has the same format as longitude, except there are only two digits for degrees and N or S for north/south latitude. The decimal equivalent of longitude and latitude and station elevation follow. The seven non-standard header lines may contain any label and contents. The label is padded to 35 characters to match the standard header lines. 3.1.2 Data Records The data records each contain time from release, pressure, temperature, dewpoint, relative humidity, U and V wind components, wind speed and direction, ascent rate, balloon position data, altitude, and quality control flags (see the QC code description). Each data line contains 21 fields, separated by spaces, with a total width of 130 characters. The data are right-justified within the fields. All fields have one decimal place of precision, with the exception of latitude and longitude, which have three decimal places of precision. The contents and sizes of the 21 fields that appear in each data record are as follows: Field Format No. Width Parameter Units Missing Value ------------------------------------------------------------------------ 1 6 F6.1 Time Seconds 9999.0 2 6 F6.1 Pressure Millibars 9999.0 3 5 F5.1 Dry-bulb Temperature Degrees C 999.0 4 5 F5.1 Dew Point Temperature Degrees C 999.0 5 5 F5.1 Relative Humidity Percent 999.0 6 6 F6.1 U Wind Component Meters / Second 9999.0 7 6 F6.1 V Wind Component Meters / Second 9999.0 8 5 F5.1 Wind Speed Meters / Second 999.0 9 5 F5.1 Wind Direction Degrees 999.0 10 5 F5.1 Ascension Rate Meters / Second 999.0 11 8 F8.3 Longitude Degrees 9999.0 12 7 F7.3 Latitude Degrees 999.0 13 5 F5.1 Elevation Angle Degrees 999.0 14 5 F5.1 Azimuth Angle Degrees 999.0 15 7 F7.1 Altitude Meters 99999.0 16 4 F4.1 QC for Pressure Code (see below) 99.0 17 4 F4.1 QC for Temperature Code (see below) 99.0 18 4 F4.1 QC for Humidity Code (see below) 99.0 19 4 F4.1 QC for U Component Code (see below) 99.0 20 4 F4.1 QC for V Component Code (see below) 99.0 21 4 F4.1 QC for Ascension Rate Code (see below) 99.0 Fields 16 through 21 contain the Quality Control information derived at the UCAR Joint Office for Science Support (UCAR/JOSS). Any QC information from the original sounding is replaced by the following JOSS codes: Code Description 99.0 Unchecked (QC information is "missing.") ("UNCHECKED") 1.0 Checked, datum seems physically reasonable. ("GOOD") 2.0 Checked, datum seems questionable on physical basis.("MAYBE") 3.0 Checked, datum seems to be in error. ("BAD") 4.0 Checked, datum is interpolated. ("ESTIMATED") 9.0 Checked, datum was missing in original file. ("MISSING") 3.1.2 Sample Data The following is a sample record of DYCOMS-II Vandenberg High Resolution Radiosonde data in JOSS CLASS format. The data portion is much longer than 80 characters and, therefore, wraps around to a second line. See section 3.1 for an exact format specification 3.2 Station List Station Name State ID WMO # Lat Lon Elev ----------------------------------------------------------- Vandenberg AFB CA VBG 72393 34.75 -120.57 100 4.0 Quality Control Procedures This dataset underwent an automated QC process. The dataset underwent internal consistency checks which included two types of checks, gross limit checks on all parameters and rate-of-change checks on temperature, pressure and ascension rate. Some further information on the QC processing conducted by JOSS can be found in Loehrer et al. (1996) and Loehrer et al. (1998). 4.1 Gross Limit Checks These checks were conducted on each sounding and data were automatically flagged as appropriate. Only the data point under examination was flagged. JOSS conducted the following gross limit checks on the sounding dataset. In the table P = pressure, T = temperature, RH = relative humidity, U = U wind component, V = V wind component, B = bad, and Q = questionable. __________________________________________________________________ Parameter(s) Flag Parameter Gross Limit Check Flagged Applied __________________________________________________________________ Pressure < 0 mb or > 1030 mb P B Altitude < 0 m or > 35000 m P, T, RH Q Temperature < -80C or > 45C T Q Dew Point < -99.9C or > 30C RH Q > Temperature T, RH Q Relative Humidity < 0% or > 100% RH B Wind Speed < 0 m/s or > 100 m/s U, V Q > 150 m/s U, V B U Wind Component < 0 m/s or > 100 m/s U Q > 150 m/s U B V Wind Component < 0 m/s or > 100 m/s V Q > 150 m/s V B Wind Direction < 0 deg or > 360 deg U, V B Ascent Rate < -10 m/s or > 10 m/s P, T, RH Q _________________________________________________________________ 4.2 Vertical Consistency Checks These checks were conducted on each sounding and data were automatically flagged as appropriate. All items within the table are as previously defined. _____________________________________________________________________ Vertical Consistency Parameter(s) Flag Parameter Check Flagged Applied _____________________________________________________________________ Time decreasing/equal None None Altitude decreasing/equal P, T, RH Q Pressure increasing/equal P, T, RH Q > 1 mb/s or < -1 mb/s P, T, RH Q > 2 mb/s or < -2 mb/s P, T, RH B Temperature < -15 C/km P, T, RH Q < -30 C/km P, T, RH B > 5 C/km (not applied at p < 150mb) P, T, RH Q < 30 C/km (not applied at p < 150mb) P, T, RH B Ascent Rate change of > 3 m/s or < -3 m/s P Q change of > 5 m/s or < -5 m/s P B _____________________________________________________________________ 5.0 References Loehrer, S. M., T. A. Edmands, and J. A. Moore, 1996: TOGA COARE upper-air sounding data archive: development and quality control procedures. Bull. Amer. Meteor. Soc., 77, 2651-2671. Loehrer, S. M., S. F. Williams, and J. A. Moore, 1998: Results from UCAR/JOSS quality control of atmospheric soundings from field projects. Preprints, Tenth Symposium on Meteorological Observations and Instrumentation, Phoenix, AZ, Amer. Meteor. Soc., 1-6.