I have located Smileyberg ECOR data from April 25, 1998 to May 13, with holes in it. I have placed that data onto the ABLE web server data archive area. Please note that this data has not been checked at all for flux quality, but may be useful for other, e.g. wind speed/dir purposes. To use these Pre-May 9th data you must be aware of some ECOR direction issues which I will now address: The "boom_angle" setting in config.dat was initially set to the incorrect value of 0 degrees. It should be 330 degrees. Thus the direction values reported in the "flx" and "dat" data files need to have 30 degrees subtracted from them for the data prior to May 9. The "boom_angle" was briefly set to 30 degrees from 0230 to 1600 on May 9th, then corrected to 330 degrees, the proper value. To be complete, directions should then be OK until Sep 22 when the ECOR was moved to its permanent site. The head was was installed 180 degrees different and within a few hours (by Sep 22 2000) the config.dat was updated with the proper new "boom_angle" of 150 degrees.