ACE-1: NSF/NCAR C-130 OH, H2SO4, MSA Measurements
This dataset consists of measurements of OH, H2SO4, and MSA made from the C-130 aircraft during ACE-1. This dataset differs from the preliminary one in several ways. First, the calibration for OH was changed. Previously a value of 5.5 x 10-20 molec/cm2 was used for the H2O absoption cross section at 1849 nm. Recent work however at NCAR and Harvard indicate that the reported value should be higher. A value of 7.2 x 10-20 molec/cm2 was used in this analysis. Secondly, the values presented in the preliminary dataset were calculated using a calibration constant measured at sea-level, where an altitude dependent calibration constant was used in this analysis.
- ORDER data for delivery by FTP
|Subscribe||Subscribe to receive email when new or updated data is available.|
|Frequency||< 1 minute|
|GCMD Science Keywords|
|Begin datetime||1995-11-02 00:00:00|
|End datetime||1995-12-23 23:59:59|
Map data from IBCSO, IBCAO, and Global Topography.
Maximum (North) Latitude:
Minimum (South) Latitude:
Minimum (West) Longitude: 130.00, Maximum (East) Longitude: -104.00
Additional contact information
- principalInvestigator: Fred Eisele <firstname.lastname@example.org>
- author: Fred Eisele <email@example.com>
- originator: NCAR Atmospheric Chemistry Division (ACD)
- author: Roy Lee Mauldin <firstname.lastname@example.org>
CitationExample citation following ESIP guidelines:
Eisele, F., Mauldin, R. 2006. ACE-1: NSF/NCAR C-130 OH, H2SO4, MSA Measurements. Version 1.0. UCAR/NCAR - Earth Observing Laboratory. https://doi.org/10.26023/FRZK-NVH9-CT0S. Accessed 11 Aug 2022.
Today's date is shown: please replace with the date of your most recent access.
Additional citation styles
The citation text below is from the DataCite Content Resolver service and may take a few seconds to load. The styles and locales are obtained from CrossCite, which also provides a citation formatter. See ReFindit for another alternative. Formatting is not perfect: please verify and edit before use. Today's date is shown: please replace with the date of your most recent access.